psylence's latest activity

In the end, I settled on the following configuration of opamps: Sparkos SS3602 for XLR, Burson V7 Pro Classic for the right channel and...

Thank you for your feedback, I took out the unused left opamps, and also the SubOut opamps. Worked great. Now I have ordered a set of...

I'm so surprised with performance of these two little amps that I want to test another theory: if removing ops from the left channel...

I'll chime in on removing unused opamps. I have two ZA3s that I run in mono mode, and a P3 which also outputs to a subwoofer. After...

Hello! I recommend erasing the old thermal paste and applying new one (arctic cooling mx-5, for example) so as not to accidentally...

Hi! I connected the subwoofer to the sub out of one of the amplifiers. The low frequency information is usually the same for the left...

Dear Valued Community Members, We are excited to share with you the essence of our brand philosophy, a testament to our relentless...

Many people prefer MUSES02 for their warm sound, maybe I'll try to play with different op-amps later :) I've swapped op-amps in XLR for...

I connected subwoofer to the sub out of one of the amplifiers with RCA. Low frequencies are usually the same on both channels. That was...

I have a pair of ss3602 and a pair of MUSE02. I intend to run two amps mono, with MUSE02 in XLR and SS3602 in right channel. Should be...

I also decided to swap the opamps in the XLR. But I would also like to change the opamp(s) for the Sub Out. Do you need to change one or...

I've tried to change op-amps in the XLR (ss3602), it sounds much better than stock, but when you swap them in the right channel, it...

Thanks for answer! Connected through RCA-RCA to sub out, works great!

Hello! I have two Fosi ZA3 in mono mode and I want to connect a subwoofer (Rel Quake) that has 1-RCA low level connection and Speakon...