Recent content by sbiehe

Ha ha - by neighbour components I was referring to all the stuff lying around behind the amplifiers in the cabinet. The amount of wires and cables to connect PSU's, amp's, a TV, a Chromecast and two speakers is simply staggering. Add to that that I also keep my printer in the same cabinet...

Does it sound like my recording?

Hi Linkestis Please ser my reply in the other thread in the amplifier section. I Think it’s an EMR issue from neighbour components such as ac/dc converters etc. Try removing the BT antenna and make some free space around your ZD3. It seems to have worked for me.

Hi Moonnn I have removed my Bluetooth antenna from the ZD3 and moved the ZD3 away from the small switch-mode supplies and other auxiliary devices lying nearby. This seems to have cleared the issue, but if I for some reason fumble around with e.g. my Chromecast Audio which is connected to the...

Hello I have a ZD3 connected via HDMI to a Sony LCD TV and via a TOSLINK to a Chromecast Audio. The ZD3 is driving two ZA3's in mono mode through RCA cables. The ZD3 controls the ZA3's through its 12V output trigger. For the first hour or so, the system plays just fine but after some time, an...

I have a ZD3 hooked up to a Chromecast audio via TOSLINK and a Sony TV via HDMI. The ZD3 is sending audio to a set of ZA3's in RCA-MONO configuration. The ZA3's power up on a 12V sync signal from the ZD3. Every once in a while, I hear a noise in the left channel only. The sound is attached as...