Charles's latest activity

We are preparing to adopt the universal standard gain of 6dB. Generally speaking, 6dB should be compatible with most devices now, right...

We have a similar product with almost the same functionality as you mentioned, but the DAC chip uses AK4493S.

Yes, it's possible. If you don't need so many interfaces with ZD3, you can also purchase our ZP3 directly. ZP3 has HPF function and two...

At present, it is possible to accommodate two ZA3s.

Yes, we plan not to use a potentiometer, but we do design a balance adjustment function.

Thank you for your suggestion. We are also considering whether to add a separate power button. We would like to ask why it is necessary...

I agree with your point of view. The information on this display screen is just a randomly selected display content. In fact, we may...

We are also considering using a power socket without a switch, similar to the picture below. We are also considering using a linear...

Personally, I would use the knob only to adjust the volume. Just like vintage equipment, where each button, knob, or switch had a single...

You can also turn off LPF, which means you have an additional RCA input port and can connect an additional audio source device.

The unit looks great and not many changes recommended physically other than the ones suggested above. In terms of the display when used...

Our current definition of knob operation is as follows: 1. Press and hold for 2 seconds to shut down 2. Click: Power on 3...

I don't quite understand what you mean. Besides static volume, input mode, and sampling rate, do you want to display anything else? Is...

May I ask which products the two OPT inputs are used to connect to?

Hi Fosiphiles, We’re thrilled to officially kick off this thread with exciting news: Q8, one of our most anticipated upcoming products...