A-SPEC
New member
I finally got around to building a mini rack for the new system, now that I have stopped adding to it. 
(probably...)
Here are the specs for the detail minded:
19"W x 8"D x 7.5"H
19" x 8" x .125" 6061 aluminum sheet
1/4" od alum threaded stand-offs, 1", 1.5", 2.0" 2.5"
8-32 1" long threaded rods
8-32 x 3/4" flat screws
Removed the oem feet on the V3 Monos, installed 1/2" OD x 1/4" Sorbothane feet (a little more height for cooling and way better isolation)
Removed the oem feet on the Q6 DACs, installed 1/2" OD x 1/16" Polyurethane rubber feet Duro 80 (lower height, faceplate just clears shelf)
I started with the DAC shelf having a 2" stand off height but wanted the top shelf components to have more clearance, replaced the feet on the DACs and went with 1.5" height.
(probably...)Here are the specs for the detail minded:
19"W x 8"D x 7.5"H
19" x 8" x .125" 6061 aluminum sheet
1/4" od alum threaded stand-offs, 1", 1.5", 2.0" 2.5"
8-32 1" long threaded rods
8-32 x 3/4" flat screws
Removed the oem feet on the V3 Monos, installed 1/2" OD x 1/4" Sorbothane feet (a little more height for cooling and way better isolation)
Removed the oem feet on the Q6 DACs, installed 1/2" OD x 1/16" Polyurethane rubber feet Duro 80 (lower height, faceplate just clears shelf)
I started with the DAC shelf having a 2" stand off height but wanted the top shelf components to have more clearance, replaced the feet on the DACs and went with 1.5" height.
