Co-Create Subwoofer amplifier with V3/P3 form factor, phase control and correct frequency control

[onceKilos]

It would be very nice to have a subwoofer amplifier with a phase control, a knob with 0 to 180 would be awesome (or at least a swtich for 0 or 180) to blend it with the current audio systems

Also a good and functional frequency cut control that works properly, the one on the TP-02 doesn't work, even if you put it to the minimum cut it still let pass frequencies up to 200hz, and some above as well

 

[qozzie]

The amp should be able to take stereo XLR/TRS and RCA input, sum to mono, but also pass-thru stereo or mono via XLR/TRS and RCA.

 

[delaforetnoire]

*It has to provide a real -24db cut off filter under 40hz to 120hz about.

*re design the case with more holes on the top because of more heat génération with low frequencies

*ensure that it can hold long time signal at 2 ohms without going in security mode

*Make a versatile amp than can be used later in little PA sound systems, portable sound systems on 24v or 32v mode...

 

[onceKilos]

This is how I imagine it, keep it simple